The #1 question is how much will it cost to seal my pavers?
Cost
While Paver Restoration of Fl and most companies alike have always avoided answering this in writing in the past because sealer, material cost, operational cost change, and quite frankly, there are so many other variables that it is hard to give an idea of price. These are not etched in stone; below is a rough idea of how much it will cost.
Variables:
Types of Brick – The main two types of brick pavers are clay and concrete; the cost between the two can be different in how they each take in the sealer and other cleaning methods. Within each category, there are also many differences: cast, tumbled, flat, or textured.
The width of Joints – Some brick pavers have very narrow joints, which save on the unique blended and cleaned sand that we use but can also make hydro compacting the sand into the joints a little more complicated and time-consuming. For pavers with wide joints, we will use more specially blended and cleaned sand and require a bit of finesse to ensure the sand is at the proper level as we follow the icpi standards. In addition, when sealing your paver surfaces with wide joints, the amount of sealer will increase to saturate and harden the joints during our process. We recognize the Importance of Brick Paver Sand & Industrial Sealers to Maintain your Hardscapes Properly.
The porosity of the Pavers – Some pavers are more/less porous than others, which will increase or decrease how much sealer will be used. Some older or more weathered pavers will also have a more porous surface that will require more sealer, while newer pavers will not require as much.
Location of Pavers – How far from the street or access point where the truck and trailer will be parked? What access to water is there? Do we have to bring water on-site; do we need to use our portable commercial equipment? This will all add to the square foot cost.
What look is desired – The difference between a wet look, natural luster, and high gloss can also vary the cost.
What is the total sq ft of the project – The higher the square footage of the paver surface, the less it will cost per sq ft… A 2000 sq ft driveway may cost less per square foot than a 400 sq foot patio.
We are considering all these variables and giving you a cost for a thorough cleaning, hydro compacting the sand into the joints, and applying up to 3 liberal coats of our wet-look sealer without watering it down with our three-coat process. We offer a two or 3-coat process depending on your budget and look desired.
Call us.
Get a detailed quote to Clean and Seal your Pavers, Travertine and Concrete. Contact The Top-Rated Family-owned Operated Paver Sealing Company.
Give us a call; you will be pleasantly surprised.
Contact Paver Restoration Of Fl. @ 352-282-2886 or click this link to fill out an online request form for a no-obligation-free estimate.
The #1 question is how much will it cost to seal my pavers?
Comments